CARTRIDGERS
CARTRIDGE HEATERS
LOW LOAD CARTRIDGES
GENERAL CHARACTERISTICS
The cartridges of low load are usually used mostly in the footwear industry. They are cartridges that support lower temperatures, never higher than 300ºC.
The length of standard wiring is of 250mm(without thermocouple). Also cartridge with long wiring can be made using wiring for as long as 1000mm with or without thermocouple.
OTHERS DIAMETERS
We can provide our customer with any diameter established from 8mm to 50mm. For any other size of diameter do not doubt in contacting with us. The tube is of stainless steel & the cartridge with weld TIG and connection cables of nickel.
INSTRUCTIONS OF POSITIONNING AND ASSEMBLY
The correct positioning of the cartridge in the hole is essential for the good operation and yield of the cartridge. The hole must be made with an ISO tolerance of H7. Below you can see a table of lodging tolerances.
